Corkjoint Bostik Seal N Flex FC | Fast Curing Polyurethane Trafficable Joint Sealant

FAST CURING POLYURETHANE TRAFFICABLE JOINT SEALANT

Description

BOSTIK SEAL N FLEX FC Fast Curing Polyurethane Trafficable Joint Sealant is a fast cure high performance one component polyurethane elastomeric joint sealant. When fully cured; Bostik Seal ‘N’ Flex FC will provide a tough, flexible seal capable of cyclic expansion and compression to 50% of original joint width without primer on most substrates. Bostik Seal ‘N’ Flex FC is unaffected by ultra-violet radiation, atmospheric contamination or pollution. Its excellent weather ability enables it to retain its original properties after years of expose. (C.S.I.R.O. RILEM expose study).

Uses

• Trafficable – Plats, stairs, roads, runways, aprons, and pavements

• Vertical – Precast, block work, aluminums, plasterboards, timber and most common building substrates

• Pick Resistant – Prison, cells, schools, and public, amenties

• Chemical Resistant – Service stations, hangers, aprons and bonded areas

• Fungal Resistant – Wet areas, wash down bays, food processing

Advantages

• Australia made

• Aromatic technology

• U.V resistant

• +25% movement

• Abrasion & pick resistant

• AS 4020

• Excellent chemical resistant

• Resistant to fungals attach AS 1157.2

• Acoustic properties

• ISO 9002

• No priming required for most substrates

• No discolouration

• Low modulus elastometric sealant

• Security applications

• Potable water approval

• Petroleum & wash down environment

• Chicken, poultry & food environment

• Paintable

Application

Key Features

1. Fast-curing: The sealant is designed to cure quickly, allowing the joint to be opened to foot traffic within just a few hours after application, and vehicle traffic within 24 hours.

2. High strength: The polyurethane formula of the sealant gives it high strength, which allows it to withstand the stresses and strains placed on trafficable floor joints.

3. Chemical resistant: The sealant is highly resistant to a wide range of chemicals, including oils, fuels, and solvents, which makes it suitable for use in environments where these substances may be present.

4. UV resistant: The sealant is formulated to be UV resistant, which helps to prevent it from breaking down or deteriorating when exposed to sunlight or other forms of UV radiation.

5. Easy to apply: The sealant is easy to apply with a standard caulking gun, and can be tooled and smoothed easily with a putty knife or similar tool.

BOSTIK SEAL ‘N’ FLEX FC is commonly used in a variety of industrial and commercial applications, including sealing floor joints in warehouses, car parks, and other facilities with heavy vehicle traffic. Its fast-curing properties make it ideal for situations where downtime must be kept to a minimum, while its high strength and chemical resistance ensure that it will provide long-lasting protection for the joint.

Limitation

• Bostik Seal ‘N’ Flex FC should not be used in highly chlorinated areas such as swimming pools, spas etc.

• Bostik Seal ‘N’ Flex FC should not be used in glazing applications subject to UV light radiation or direct sunlight exposure.

• Bostik Seal ‘N’ Flex FC should not be applied or finished with wet tooling techniques, using solvents, water or detergent/ soap solutions.

• Bostik Seal ‘N’ Flex FC sealant should not be applied to unpredictable porous surfaces such as marble, limestone, or granite unless a standard of appearance has been agreed on as a result of testing for stain and/or discoloration.

• Do not use in interior or exterior structural sealing below the waterline in marine applications.

• Do not use in applications less than 5mm in width or less than 6mm in depth.

• Do not apply to surfaces with special protective or cosmetic coating such as mirrors, reflective glass or surfaces coated with Teflon, Polyethylene, Polypropylene or PTFE.

Colour

• Grey

• White

• Black

Packaging

• 600 ml / sausage (20 sausage / box)